HS-СBSP500 сoiling and packaging line
The modern and fully automatic line is designed to combine the processes of coiling and packaging of cable products.
Fixation by using polypropylene tape, shrink film packaging, automatic coil labeling.
- Production time of the line: 70 calendar days.
- The warranty period for the equipment: 1-3 years after commissioning.
- Support service: Accessible service support centers are in Russia, Kazakhstan, Uzbekistan, and also we have online support and remote diagnostics.
- Flexible payment terms: Partial payment before signing the contract and full payment after readiness of equipment before shipment.
- Commissioning: Qualified specialists of Habsans will install the equipment, set it up and train the staff.
| Technical characteristics of HS-СBSP500 сoiling and packaging line | |
|---|---|
| Name | Parameters |
| Cable diameter, (mm) | Ø 5 – 20 |
| Maximum line speed, (m/min) | 180 |
| Coil fixation | Polypropylene tape, 2-3 sides |
| PVC film around the perimeter | |
| Packaging | Shrink film |
| Label | Automatic, self-sticking |
| Power Supply | AC 380V, three-phase, 50 Hz |
| The line nominal power, (kW) | 45 |
| Active pay-off machine, (mm) | Ø 1000 – 1600 |
General information about the HS-CBSP500 line
The coiling systems is necessary for the final stage of the cable manufacturing, at this stage machines form coils and pack them into a protective layer of polyethylene film, that used for transportation.
The line allows to wind Ø 5 ~ 20 mm wires into coils with tape fixation through the center at 2-3 points or PVC film around the perimeter of the coil. Automatic packaging by using PVC shrink film and automatic labeling.
Automatic coiling and packaging systems are available in various optional configurations: by the customer's request, automatic, semi-automatic, hand operated and embedded into extrusion lines.
The coiling process of the finished cable product, as well as its packaging process, are two different processes, but they are often combined into one line, and therefore speeds up the production process.
Modern lines automatically measure the predefined measurement length, and can be equipped with the storage for non-stop operation of the cable cutting and laying the next coil.
Fixing the coils with the special polypropylene tape, optionally from 2 or 3 sides, which ensures the reliability of the cable shape during transportation and unpacking.
Also, the line can be completed with various measuring and auxiliary devices, such as:
- Insulation resistance monitoring device (DTST)
- Labeling system:
- Diameter measuring with insulation breakdown testing;
- The packing and palletizing machine.
Also, modern coiling lines provide reliable polyethylene packaging made of shrink film, that fired in a special thermal oven, and provide labeling for transporting the finished product.
We recommend watching an overview video about the HS-C BSP 500 automatic coiling and packaging line
Q&A for automatic сoiling and packaging lines
The automatic coiling and packaging line is an automatic, complex equipment for forming coils, which have required meterage, its packaging in the ruggedized shrink wrap and labeling of finished products.
The systems can be automatic, semi-automatic, hand operated or embedded into extrusion lines, depending on the production requirements.
All procedures inside the line occur automatically, which significantly accelerates the manufacturing process, ensures accurate cable measurement length and ensures reliable packaging.
Modern lines are equipped with the storage for non-stop operation of the cable cutting and laying the next coil.
The line component parts are individual and can be customized specifically under necessary requirements. Additional functions may include labeling systems, diameter gauge, insulation testing and the packing and palletizing machine.
