Dual cantilever take-up machine
The dual cantilever take-up machine with the spreader device is suitable for use in high-speed lines, for winding the cable onto the coil. It does not require the deep foundation.
- Production time: up to 45 calendar days.
- Delivery: up to 30 days
- Support service: service center in Russia, online support.
- Equipment warranty: 2 years after commissioning.
| Technical characteristics of the dual cantilever take-up machine. | ||||
|---|---|---|---|---|
| Suitable coil | Ø500-630 (mm) | Ø630-800 (mm) | Ø800-1250 (mm) | Ø1000-1400 (mm) |
| The coil weight while loading | 600 kg | 850 kg | 1500 kg | 3000 kg |
| Coil load / unload: | 2х0.5 kW | 2х0.75 kW | 2х1.1 kW | 2х1.5 kW |
| Power | 2x4 kW | 2х5.5 kW | 2х7.5 kW | 2х7.5 kW |
| Spreader device | on the smooth shaft | |||
| Coil changing | Manual | |||
Q&A for dual cantilever take-up machine
The dual cantilever take-up machine is the equipment, that designed for cable taking-up and wind it onto the drum. The machine is used in production lines such as rewinding lines, extrusion lines and torsion lines for convenient and efficient processing of cable materials.
The dual cantilever take-up machine doesn’t require the deep foundation, which simplifies the installation process and saves resources. It also provides high productivity and reliability during the cable winding onto the coil.
Operation control and monitoring of the dual cantilever take-up machine is carried out through the integrated control system. The operator can customize the winding parameters, monitor the process and regulate it in real time by using this system.
