РУ
EN

Portal take-up machines

The portal take-up machine is used to take-up (wind) the cable on the coil, with maintaining tension and the ability to operate at high speeds. It is suitable for the taking-up of the large cross-section cable.

It is used as part of the line

Portal take-up machine
  • Production time: up to 45 calendar days.
  • Delivery: up to 30 days
  • Support service: service center in Russia, online support.
  • Equipment warranty: 2 years after commissioning.
Technical characteristics of the portal take-up machine:
Suitable coil, (mm) Ø1000-1600 Ø1000-1800 Ø1000-2000 Ø1600-2500 Ø1600-3200
The coil weight while loading, (kg) 5 000 8 000 10 000 12 000 18 000
Power, (kW) 5.5  11 11 15 18
Speed, (m/min) 150 100 100 80 80
Spreader device, (kW) 1.5 1.5 1.5 3.75 5.5 
Gearbox type Worm type
Maximum shift pitch, (mm) 100 mm
Fixation type Column clamping on both sides
Height of the machine 2500 mm
Construction Upper crossbeam / lower crossbeam
-->

Q&A for portal pay-off machine

What is the portal pay-off machine and what is it used for?

The portal take-up machine is a specialized equipment, intended for wires high speed paying off, both insulated and non-insulated cores. The workpiece is automatically laid out without bending, by moving the receiving unit to the side across the line axis.

In which spheres are portal pay-off machines used?

The portal take-up machine are used in different industries, including cable production, energy, construction, transport and other industry spheres where it’s required winding of the large-section cable on coils.

Can the portal take-up machine work with different types of cable?

Yes, many portal take-up machine can work with different types of cable and cable, which has different diameters. But, before using it, you need to make sure that it is suitable for specific cable types.

Add to Favorites
Request