РУ
EN

Horizontal concentric taping head

Used in the production of large cross-section cables, concentric winding with copper and aluminum tapes, polyethylene, paper and other non-metallic tapes.

Horizontal concentric taping head
  • Production time: 60 calendar days.
  • The warranty period for the equipment: 1-3 years after commissioning.
  • Support service: Accessible service support centers are in Russia, Kazakhstan, Uzbekistan, and also we have online support and remote diagnostics.
  • Flexible payment terms. Partial payment before signing the contract and full payment after readiness of equipment before shipment.
  • Commissioning: Qualified specialists of Habsans will install the equipment, set it up and train the staff.
Characteristics of horizontal concentric taping head:
Name Parameters
Maximum workpiece size, (mm) Ø80
Outer diameter of disk with tape, (mm) Ø600
Suitable tape width, (mm) 10 – 60
Maximum speed of rotation of the tape head, (rpm) 500
Tape material polyester, polyethylene, mylar, paper, copper and aluminum tape with a thickness of no more than 0.10 mm
Storage device 10 – 15 reel
Winding pitch, (mm) 20 – 200
Pitch changing stepless adjustment
Inverter motor power, (kW) 18,5

General information about horizontal concentric taping head

Purpose

The concentric taping head is used for the production of large-section cables with concentric winding with copper and aluminum tapes, as well as polyethylene, paper and other non-metallic materials.

Operating principle

The tape disks are placed on a storage device. An electromechanical drive drive is used to move the tape to the winding head. The support with jack is controlled manually. The tape from the drive is installed in the winding head and secured with a jack. After installing the tape, the drive returns to its original position. Equipped with safety sensors.

Advantages

Questions-Answers for horizontal concentric taping head

What types of material can be used in the taping process?

Copper and aluminum foil, polyethylene tape, paper, fabric and other non-metallic tapes.

What is the size of the input workpiece before shield application?

Cable diameter before shielding Ø15 – Ø80 mm.

In what range is the belt tension adjustable?

The tension is smoothly adjusted in accordance with the specified mode in the range of 5 Nm-90 Nm ± 1 Nm.

Add to Favorites
Request