Multi-impression drawing machines (Multi-wire drawing line)
Model range of manufactured machines: MWD18-120.4 / MWD18-120.8 / MWD18-100.14 / MWD22-100.8 / MWD22-100.16
The Multi-wire drawing line is a high-capacity drawing machine for copper or aluminum workpieces, it has up to 16 simultaneously wire workpieces with the speed of 30 m/s.
The inlet diameter of the workpiece depends on the model: 4*Ø1,85 / 8* Ø3,0 / 7* Ø2,6 / 14* Ø1,8 / 8* Ø2,6 / 16* Ø2,6.
- Production time of the line: 60 calendar days.
- The warranty period for the equipment: 1-3 years after commissioning.
- Support service: Accessible service support centers are in Russia, Kazakhstan, Uzbekistan, and also we have online support and remote diagnostics.
- Flexible payment terms. Partial payment before signing the contract and full payment after readiness of equipment before shipment.
- Commissioning: Qualified specialists of Habsans will install the equipment, set it up and train the staff.
| Characteristics of multi-wire drawing (MWD) line’s model range | |||||
|---|---|---|---|---|---|
| Model | MWD18/120.4 | MWD18/120.8 | MWD18/100.14 | MWD22/100.8 | MWD22/100.16 |
| Number of impressions | 4 | 8 | 14 | 8 | 16 |
| Amount of dies | 18 | 18 | 18 | 22 | 24 |
| Outlet diameter (mm) | 4*Ø1,85 | 8* Ø3,0 | 7* Ø2,6 | 8* Ø2,6 | 16* Ø2,6 |
| 14* Ø1,8 | |||||
| Input diameter (mm) | Ø0,25 ~ Ø0.70 | Ø0.35 ~ Ø1.05 | Ø0.35 ~ Ø0.65 | Ø0.20 ~ Ø0.70 | Ø0.16 ~ Ø0.40 |
| Ø0.40 ~ Ø1.05*7 | |||||
| Capstan diameter (mm) | Ø120 | Ø120 | Ø120 | Ø120 | Ø120 |
| Wire drawing speed (Max) (m/s) | 25 | 30 | 30 | 30 | 30 |
| Capstan material | Ceramics application | Zirconium Oxide | |||
| Transmission line | Belt transmission | Сogged pinion | |||
| Annealing pot voltage (V) | 0-60 | ||||
| Annealing pot current (A) | 0-600 | 0-3500 | 0-4500 | 0-3500 | 0-3000 |
General Information about multi-impression drawing machines ( Multi-wire drawing line)
The Multi-wire drawing line is a high-capacity drawing machine for copper or aluminum workpieces, it has up to 16 simultaneously wire workpieces with the speed of 30 m/s.
The Multi-wire drawing line is used for drawing copper or aluminum wire with an input diameter of the workpiece (depending on the model) - 4*Ø1.85/8* Ø3.0 / 7* Ø2.6 / 14* Ø1.8/8* Ø2.6 / 16* Ø2.6.
Q&A for multi-wire drawing line
The Multi-wire drawing line is a high-capacity drawing machine for copper or aluminum workpieces, that is able to wire up to 16 copper or aluminum wire workpieces simultaneously at high speed.
The wire drawing speed of the Multi-impression drawing machines (Multi-wire drawing line) is 30 m/s, which ensures high productivity of the production process.
