Fine drawing machine
Model range of manufactured machines: FDM-DT17.2 - FDM-DT24.2B / FDM-DT17 – FDM-DT14
Fine drawing machine lines for the copper or aluminum wire production in the single-impression/double-impression machine variation with annealing attachment.
Input diameter of the workpiece (mm): Ø0,8 - Ø2 мм. The output diameter of the workpiece: from Ø0.1 to Ø0,5 mm (depends on the selected machine model).
Fine drawing machines are the equipment for copper and aluminum processing by the rolled wire stretching through the dies for the purpose of obtaining the workpiece fine diameter.
- Production time of the line: 60 calendar days.
- The warranty period for the equipment: 1-3 years after commissioning.
- Support service: Accessible service support centers are in Russia, Kazakhstan, Uzbekistan, and also we have online support and remote diagnostics.
- Flexible payment terms: Partial payment before signing the contract and full payment after readiness of equipment before shipment.
- Commissioning: Qualified specialists of Habsans will install the equipment, set it up and train the staff.
| Characteristics of DT17.2-DT24.2B double-impression fine drawing machines. | |||||
|---|---|---|---|---|---|
| Model | FDM-DT17.2 | FDM-DT22.2 | FDM-DT24.2A | FDM-DT24.2B | |
| Number of impressions | 2 | ||||
| The workpiece at the input (mm) | single impression | 1*Ø2,0 | 1*Ø1,5 | 1* 1,38 | 1* 1,0 |
| double impression | 2* Ø1,6 | 2* Ø1,2 | 2* 1,0 | 2* 0,8 | |
| The wire at the output (mm) | single impression | 1*Ø0,3~Ø1,0 | 1*Ø0,12~Ø0,50 | 1*Ø0,12~Ø0,4 | 1*Ø0,07~Ø0,25 |
| double impression | 2*Ø0,3~Ø0,7 | 2*Ø0,12~Ø0,40 | 2*Ø0,12~Ø0,35 | 2*Ø0,07~Ø0,16 | |
| Amount of dies | 17 | 22 | 24 | 24 | |
| Linear speed (m/min.) | 1500 | 1800 | 1800 | 1800 | |
| Annealing roll diameter | Ø200 | Ø160 | Ø160 | Ø140 | |
| Annealing voltage (V) | 0-60 V | ||||
| Inert annealing medium | Steam or Nitrogen | ||||
| Capstan working face | Plasma ceramic | ||||
| Coli size (mm) | It can be modified to the required size of a customer | ||||
| Number of taking-up coils | from 1 to 2 | ||||
| Characteristics of FDM/DT17-DT14 single-impression fine drawing machines. | ||||
|---|---|---|---|---|
| Model | FDM-DT17/A | FDM-DT17/B | FDM-DT16 | FDM-DT14 |
| Number of impressions | 1 | |||
| The workpiece at the input (mm) | Ø2.6 | Ø2.0 | Ø1.6 | Ø1.6 |
| The wire at the output (mm) | Ø0.35~Ø1.0 | Ø0.25~Ø0.8 | Ø0.20~Ø0.65 | Ø0.25~Ø0.7 |
| Amount of dies | 17 | 17 | 16 | 14 |
| Linear speed (m/min.) | 1800 | 1800 | 1500 | 1200 |
| Annealing wheel diameter | Ø200 | Ø200 | Ø200 | Ø200 |
| Annealing voltage (V) | 0-60 V | |||
| Inert annealing medium | Steam or Nitrogen | |||
| Capstan working face | Plasma ceramic | Zirconium oxide or silicon carbide | ||
| Transmission line | Belt transmission | |||
| Coli size (mm) | 300 mm is standard, it can be replaced to fit the required size of a client | |||
| Functions | Dual take-up machine | |||
| Characteristics of DT22,24,24.B single-impression fine drawing machines. | |||
|---|---|---|---|
| Model | FDM-DT24 | FDM-DT22 | FDM-DT24.B |
| Number of impressions | 1 | ||
| The workpiece at the input (mm) | Ø1.20 | Ø1.38 | Ø0.8 |
| The wire at the output (mm) | Ø0.10~Ø0.35 | Ø0.12~Ø0.45 | Ø0.07~Ø0.20 |
| Amount of dies | 24 | 22 | 24 |
| Linear speed (m/min.) | 1800 | 1800 | 1800 |
| Annealing wheel diameter | Ø160 | Ø160 | Ø140 |
| Annealing voltage (V) | 0-60 V | ||
| Inert annealing medium | Steam or Nitrogen | ||
| Capstan working face | Plasma ceramic | ||
| Coli size (mm) | It can be replaced to fit the required size of a client | ||
General Information about FDM-DT 17.2-FDM-DT24.2B, FDM-DT17 – FDM-DT14 fine drawing machines
Fine drawing machines for the copper or aluminum wires drawing in the single-impression/double-impression model variation with annealing attachment. The rolled wire with Ø0,8-2,0 mm is used as a workpiece for copper or aluminum drawing. The wire output range is from Ø0.1 to 0,5 mm.
The output range varies from component parts and individual customization of the line according to customer requirements.
The range of single-impression/double-impression models of FDM/DT17.2-FDM/DT24.2B, FDM/DT17–FDM/DT14 medium drawing machines are technological and technically debugged machines for fine drawing. Each machine is the custom-made equipment, that can be equipped additionally and customized to the customer needs.
Optionally, as the take-up machine it can be used:
- Single take-up machine (the wire receiving on one coil with a size of 200-300 mm);
- Double take-up machine (the wire receiving on one coil with a size of 200-300 mm with the cutover ability from a filled coil to an empty one without stopping the line);
The fine wire drawing line is consist of:
- Pay-off machine;
- Drawing mill;
- Annealing attachment;
- Compensator valve;
- Take-up machine.
Q&A for fine wire drawing
Fine drawing machines are the equipment for copper and aluminum processing by the rolled wire stretching through the dies for the purpose of obtaining the workpiece with fine diameter. They are used for the production of a fine-diameter wire.
The choice of machine model and the configuration depends on the required range of wire diameters and other parameters, that required by a customer.
The wire, that obtained by fine drawing, is used in different industries such as electrical engineering, electronics, medical and automotive industries.
The using of the annealing attachment makes it possible to improve the wire mechanical characteristics and its structure, which may be important for certain applications.
