РУ
EN

Medium drawing machine

Model range of manufactured machines: IDM-280/9DH, IDM-280/13DH, IDM-250/17DH

Medium drawing machine lines for the copper or aluminum wire production in the single-impression/double-impression machine variation with annealing attachment.

Input diameter of the workpiece (mm): Ø2,5 – Ø3,5 mm. The diameter of the workpiece at the output: from Ø0.4 to Ø2,8 mm (depends on the selected machine model).

Medium drawing machines are the equipment for copper and aluminum processing by the rolled wire stretching through the dies.

Fine drawing machine
  • Production time of the line: 60 calendar days.
  • The warranty period for the equipment: 1-3 years after commissioning.
  • Support service: Accessible service support centers are in Russia, Kazakhstan, Uzbekistan, and also we have online support and remote diagnostics.
  • Flexible payment terms: Partial payment before signing the contract and full payment after readiness of equipment before shipment.
  • Commissioning: Qualified specialists of Habsans will install the equipment, set it up and train the staff.
Technical characteristics of medium drawing machines: IDM-280/9DH, IDM-280/13DH, IDM-250/17DH
Model IDM-280/9DH IDM-280/13DH IDM-250/17DH
Input diameter (mm) Ø2.5-3.5
Input diameter (mm) Ø1.0-2.8 Ø0.68-2.80 Ø0.4-1.6
Maximum number of dies: 9 13 17
Capstan Sheave made of carbon fiber (or zirconium, optional)
Power of the main motor (kW) 55
Power of take-up machines (kW) 7,5-15
Capstan diameter Ø280 Ø280 Ø250
Transmission mode High-precision ground gear transmission
The lubrication method during wire draft Full immersion
Tension adjustment method Pneumatic
Type of take-up machine Shaftless
Dimensions of the take-up coil (mm) Ø500 (Ø of hole is 127), Ø 630 (Ø of hole is127), or according to Customer's requirement
Type of spreader device Gear motor
Brake type Pneumatic brake disk

General information about IDM-280/9DH, IDM-280/13DH, IDM-250/17DH medium drawing machines

Medium drawing machines for the copper or aluminum wires drawing in the single-impression/double-impression model variation with annealing attachment. The rolled wire is used as a workpiece for copper or aluminum drawing: Ø2,5 – Ø3,5 mm. The wire output range is from Ø0.4 to Ø2.8 mm.

The output range varies from component parts and individual customization of the line according to customer requirements.

The range of single-impression/double-impression models of ID-280/9 DH, DM-280/13 DH, DM-250/17 DH medium drawing machines are technological and technically debugged machines for medium drawing. Each machine is the custom-made equipment, that can be equipped additionally and customized to the customer needs.

Optionally, as the take-up machine it can be used:

  • Single take-up machine (the wire receiving on one coil with a size of 500-630 mm);
  • Double take-up machine (the wire receiving on one coil with a size of 500-630 mm with the cutover ability from a filled coil to an empty one without stopping the line);

The fine wire drawing line is consist of:

  • Pay-off machine;
  • Drawing mill;
  • Annealing attachment;
  • Compensator valve;
  • Take-up machine.

Q&A for medium drawing machines

What are medium drawing machines?

Medium drawing machines are the equipment for copper and aluminum processing by the rolled wire stretching through the dies. They are used for the production of a medium-diameter wire.

What characteristics influence on the choice of the machine model and the configuration of the fine drawing line?

The choice of machine model and the configuration depends on the required range of wire diameters and other parameters, that required by a customer.

For what purposes is the wire, that obtained by medium drawing, used?

The wire, that obtained by medium drawing, is used in different industries such as electrical engineering, electronics, medical and automotive industries.

What are the advantages of medium drawing machines with annealing attachment?

The using of the annealing attachment makes it possible to improve the wire mechanical characteristics and its structure, which may be important for certain applications.

Add to Favorites
Request