Dual shaft take-up machines
The dual shaft take-up machine is used for taking-up of the cable and wire products onto the drum. It does not require the deep foundation. The control cabinet is integrated into the device, the panel has Russian language
It is used as part of the line
- Production time: up to 45 calendar days.
- Delivery: up to 30 days
- Support service: service center in Russia, online support.
- Equipment warranty: 2 years after commissioning.
| Technical characteristics of the dual shaft take-up machine: | |||
|---|---|---|---|
| Suitable coil | Ø500-630 mm | Ø630 – 800 mm | Ø630 – 1000 mm |
| The coil weight while loading | 600 kg | 850 kg | 1500Kg |
| Coil load / unload: | Manual | ||
| Coils mounting | Alongside to each other | ||
| Power | 2х2.2 kW | 2x4 kW | 2х7.5 kW |
| Taking-up speed | 450 m/min | 300 m/min | 300 m/min |
| Spreader device | Automatic, regulable | ||
| Coil changing | Manual | ||
Q&A for shaft take-up machines
The dual cantilever take-up machine is the equipment, that designed for cable taking-up and wind it onto the drum. The machine is used in production lines such as rewinding lines, extrusion lines and torsion lines for convenient and efficient processing of cable materials.
The dual shaft take-up machine doesn’t require he deep foundation, which simplifies its installation and reduces the preparing cost of the installation position. Moreover, the integrated control cabinet with the Russified panel makes the control of the machine more convenient and efficient.
The operation management and control of the dual shaft take-up machine is carried out by integrated control cabinet, that equipped with the console panel. The operator can set the winding parameters and control the operation process using this system.
At the choosing moment off the dual shaft take-up machine, attention should be paid to such characteristics as maximum load capacity, drum diameter, and maximum winding speed.
