Dual cantilever take-up machines with automatic cutover function

HS 500 - 1250 model range

The device is suitable for winding cabling and wiring products onto a coil, which is a part of the high-speed extrusion line. Wire transfer to an empty coil is automatic. The time for the coil changing is reduced as much as possible: by the button touch, the coil is rolled out of the device, the operator submits an empty coil to the loading hole.

Dual cantilever take-up machines with automatic transfer function

Production time: up to 45 calendar days.
Delivery: up to 30 days
Touch control panel has Russian language

Support service: service center in Russia, online support.
Equipment warranty: 2 years after commissioning.
It does not require the deep foundation.

Technical characteristics of the dual cantilever take-up machines with automatic transfer function
Suitable coil	Power	Winding Speed	Spreader device
2 х Ø500 mm	2x4 kW	1100 m/min	0.4 kW
2 х Ø630 mm	2х7.5 kW	1100 m/min	0.4 kW
2 х Ø800 mm	2х11 kW	600 m/min	1.0 kW
2 х Ø1000 mm	2х11 kW	800 m/min	1.0 kW
2 х Ø1250 mm	2х15 kW	800 m/min	1.5 kW

Q&A for the dual cantilever take-up machine with automatic transfer function

How does automatic wire transfer to an empty coil procced?

The automatic wire transfer to the empty coil is carried out by pressing the button on the touch control panel. The device rolls out the current coil, and the operator can feed the empty coil to the loading hole. This process is simplified as much as possible, reducing the time of the coil changing.

What is the difference between the dual take-up machine and usual one?

The dual take-up machine is designed for winding cable onto a coil, which is a part of a high-speed extrusion line. It allows to process two wires simultaneously, increasing productivity and saving time.

What are the features of machine management?

The machine is equipped with the Russified touch control panel. It allows operators to easily control and regulate the winding and wire transfer processes, making work easier.

Is it necessary to have special equipment or the foundation for the machine installing?

The machine doesn’t require the special foundation or embedding. It can be installed at floor level and integrated into the production line with minimal additional requirements.

Gallery